Incoming Calls; Activate/Deactivate Hands Free Function; Programming Memory Numbers; Calling A Memory Number - Topcom BUTLER 2950 Manual De Usuario

Topcom Butler 2950
5.1.3 Redialling the last number dialled
• Press the Line key .
• The Line/Charge indicator
• You will hear the dial tone.
• Press the Redial key
5.1.4 Redial one of the last 5 numbers dialled
• Press the Redial key
last 5 numbers dialled, press the Redial key
• Press the Line key .
• The number shown on the display is dialled automatically.
• After finishing your call, press the Line key

5.2 INCOMING CALLS

• When a call comes in, the handset will start to ring. The
• Press the Line button

5.3 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION

This function allows you to communicate without having to pick up the handset. When you are on the phone, press the
Hands free key to activate the hands free function.
Press the same button to deactivate the hands free function.
Note : When you are calling in hands free mode and you want to change the volume, press the Volume
button .
Attention !! When you use the hands free function for a long time, the batteries will be empty more quickly!

5.4 PROGRAMMING MEMORY NUMBERS

You can program 10 indirect numbers (of max. 25 digits) in the phone's memory.
• Press and hold the Memory button
• Enter the telephone number you whish to store.
• Press the Memory button
• Enter the memory location (0-9) where you want to store the number.
• You will hear a confirmation tone and the
Remarks :
If you wish to insert a pause, press the Redial/Pause button
sec.

5.5 CALLING A MEMORY NUMBER

• Press the Memory button
• Press the Line button
• Press the Line button

5.6 MUTE FUNCTION

It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by
your correspondent.
• Press the Mute button
appears on the display.
• Press the Mute button

5.7 SETTING THE VOLUME

During a conversation you can set the volume by pressing the Volume button
in Hi, Medium and Low.
Note: The hands free receiver volume is also adjustable as above described!
Topcom Butler 2950
All manuals and user guides at all-guides.com
(LED) on the base unit will blink.
. The number you last called is dialled automatically.
. The number you last called appears on the display. If you would like to dial one of the
a few times until the desired number appears on the display.
to hang up.
to answer the incoming call.
until the -icon appears on the display.
again to confirm.
-icon will disappear.
, followed by the number of the memory location (0-9).
. The memory number will be dialled automatically.
when you want to terminate the call.
during a conversation. The microphone will be deactivated. The MUTE symbol
again when you want to continue the conversation.
LED on the base will blink.
on the location where you want a pause of 3
/P
. You can set the volume alternatively
.
7