Symbols On The Product - Cleco 936491PT Manual De Instrucciones

1
Safety
1.2

Symbols on the product

 Make sure you are familiar with the meanings before you start using the device.
1.3 Basic requirements for safe working practices
CAUTION!
Electrical safety
Do not operate the charger if the housing, power cable or plug are damaged.

Do not use batteries which have been damaged or modified in any way. Batteries which have been

damaged or modified may respond unpredictably, causing fire, explosion or injury.
Do not open the charger.

Do not modify the charger structurally.

Operate the charger in dry, enclosed rooms only.

Protect the charger from moisture and rain.

Never operate the charger under unsuitable ambient conditions (i.e. where combustible gases, solvents,

dust, vapors or moisture is present).
Workstation
Ensure that there is enough space at the workstation.

Keep the work area clean and dry.

1.4 Designated use
• The charger is intended exclusively for charging the following Apex Tool Group lithium ion batteries:
• Order no. 936400PT
Order no. 935377.
1.5 Items supplied
Check shipment for transit damage and ensure that all items have been supplied:
1 Battery charger
1 EU power cable
1 NA power cable
1.6 Transport
Transport and store the charger in the original packaging. The packing is recyclable.
18
Read the Instruction Manual
before initial operation.
Slow-blow fuse
1 GB power cable
1 Instruction Manual
P2069BA/INT 2015-06
EN
Always return used electrical equipment for
recycling.
Operation only indoors or in closed prem-
ises
2069b_1_5_en_bedingt.fm, 04.08.2015