Items Supplied; Proper Use - Kraftixx TKS 254/2000 Manual De Instrucciones Original

27. Slot in stop rail, upright
28. Guide rail system
29. Leg
30. Cross-strut, front/back
31. Cross-strut, side
32. Strut for table width extension
33. Table width extension
34. Table length extension
35. Slot in stop rail, fl at
36. Strut for table length extension
37. Additional leg
38. Wrench, size 10/22 mm
39. Wrench, size 8/10 mm
40. Fastening plate
41. Pointer (angular setting)
42. Scale (angular setting)
43. Knurled screw for cross stop
44. Adjustment screw (0°)
45. Adjustment screw (45°)
46. Hexagon screw
47. Base frame
48. Lock bolt
49. Washer
50. Spring washer
51. Nut
52. Size M5 screw for container
53. Size M5 nut for container
54. Laser unit
55. On/Off switch for laser
56. Recessed head screws for laser
57. Batteries for laser
58. Laser adjustment screw
59. Container for cutting residues
60. Overload switch
61. Additional saw blade
62. Hex key (6 mm)
63. L-shaped recess in the splitter
64. Rotary knob on saw blade guard
65. Self-locking nut on saw blade guard
66. Lock bolt on saw blade guard

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
Anl_TKS_254-2000_SPK7.indb 28
GB
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Saw blade guard
•
Push stick
•
Parallel stop
•
Rubber foot (4x)
•
Cross stop
•
Leg (4x)
•
Cross-strut, front/back (2x)
•
Cross-strut, side (2x)
•
Strut for table width extension (4x)
•
Table width extension (2x)
•
Table length extension
•
Strut for table length extension (2x)
•
Additional leg (2x)
•
Wrench, size 10/22 mm
•
Wrench, size 8/10 mm
•
Hex screw (20x)
•
Lock bolt (12x)
•
Washer (24x)
•
Spring washer (24x)
•
Nut (24x)
•
Size M5 screw for container (4x)
•
Size M5 nut for container (8x)
•
Laser unit
•
Recessed head screws for laser (2x)
•
Batteries for laser (2x)
•
Container for cutting residues
•
Additional saw blade
•
Hex key (6 mm)
•
Original operating instructions
•
Safety information

3. Proper use

The bench-type circular saw is designed for the
slitting and cross-cutting (only with the cross
stop) of all types of timber commensurate with the
machine's size. The equipment is not to be used
for cutting any type of round wood.
- 28 -
28.06.2021 11:11:06