Publicidad
Idiomas disponibles
Idiomas disponibles
English
Disconnect the battery
Switching ON
Switching OFF
Lock
Switch locks to the "ON" position
Warning
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 218.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Cleaning facilities and equipment in lumbermills,
cigarette-making plants, spinning mills, etc.
○ Cleaning devices and equipment in repair shops.
○ Blowing operation.
SPECIFICATIONS
1. Power tool
Model
Voltage
No-Load Speed*
1
Maximum*
Air velocity
Average*
Air volume*
3
Continuous operating
time*
4
Battery available for
this tool*
5
Weight*
6
*1 BSL36A18, when fully charged
*2 With nozzle
*3 Without nozzle
*4 For guidance purposes only. Results will diff er according
to situations such as operating environment and battery
condition.
*5 Existing batteries (BSL3660/3620/3626, etc.) cannot be
used with this tool.
*6 According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery (sold separately)
Model
Voltage
Battery capacity
Available cordless
products**
Available charger
*
The tool itself will automatically switch over.
** Please see our general catalogue for details.
3. Charger (sold separately)
Model
Charging voltage
Weight
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the housing tightly and push the battery latches to
remove the battery (see Fig. 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
8
RB18DC
18 V
0–20000 min
–1
0–95 m/s
2
0–78 m/s
2
0–3.5 m
/min
3
3: Approximately 20 minutes
2: Approximately 55 minutes
1: Approximately 130 minutes
Multi volt battery, BSL18 Series
1.8 kg (BSL36A18)
2.1 kg (BSL36B18)
BSL36A18
BSL36B18
36 V / 18 V (Automatic Switching*)
2.5 Ah / 5.0 Ah
4.0 Ah / 8.0 Ah
(Automatic Switching*)
Multi volt series, 18 V product
Sliding charger for lithium ion
batteries
UC18YSL3
14.4 V–18 V
0.6 kg
Publicidad
