Lt1000 Mini; Preparing The Laptop; Pre-Operation Inspection - RIDGID LT1000 SeeSnake Manual De Operador

To install the stabilizers:
1. Remove the rubber foot from a leg of the frame.
2. Slide the stabilizer onto the leg of the frame, with
the solid face toward the top of the frame.
3. Replace the rubber foot and seat it firmly.
4. Repeat for all four legs. On the larger Standard unit,
install stabilizers only on the legs without wheels.
Figure 19 – Stabilizers installed

LT1000 Mini

Figure 20 – LT1000 Mini
The LT1000 Mini is a sturdy portable frame supporting
an LT1000 unit. It is light-weight, easy-to-carry and can
be used with any SeeSnake reel simply by connecting
the SeeSnake System Cable. It is an economical alterna-
tive if you need to shift your LT1000 between SeeSnake
reels frequently. The LT1000 Mini is shipped with the
LT1000 unit already installed on the portable frame.

Preparing the Laptop

To operate correctly with the LT1000, the laptop to be
used must have SeeSnake HQ software installed on it.
HQ software enables you to create, manage and store
images, audio and video from the LT1000. The software
is on the CD that ships with the LT1000. To load the
software from the CD:
SeeSnake® LT1000
You must install SeeSnake HQ and its drivers before con-
necting the LT1000 to your computer.
1. Insert the CD into the computer's CD drive.
2. The laptop should auto-detect the CD and begin
the installation process. It may ask for an admin
password before installing the HQ software.
3. When the software installation is complete, eject
the CD and store it in a safe place.
NOTE! Software update checks will occur automatically
when the laptop is connected to the Internet. If an
update is detected you will be asked if you want to
install it, and the update will occur automatically
if you indicate you want it installed. The latest ver-
sion can be checked for manually by placing the
laptop on-line and pointing an Internet browser
to http://www.hq.ridgid.com/product-hq.php.
4. Alternatively the software may be installed by brows-
ing to the updates website given above and follow-
ing the instructions found there.
5. For detailed instructions on using HQ software to
manage your video clips, still photos, reports, cus-
tomer information and formats, direct a web-con-
nected browser to http://www.hq.ridgid.com/. You
will find on-line user instructions for every aspect of
HQ's capabilities there.

Pre-Operation Inspection

WARNING
Before each use, inspect your SeeSnake LT1000 and
correct any problems to reduce the risk of serious
injury from electrical shock or other causes and pre-
vent machine damage.
1. Confirm that the power is OFF, any external power
and cords are disconnected and the battery is re-
moved. Inspect the cords, cables and connectors for
damage or modification.
2. Clean any dirt, oil or other contamination from the
SeeSnake LT1000 to aid in inspection and to pre-
vent the unit from slipping from your grip while
transporting or using.
3. Inspect the LT1000 for any broken, worn, missing,
misaligned or binding parts, or any other condi-
tion which might prevent safe, normal operation.
Ensure the LT1000 mounting brackets are securely
tightened.
11