Uline H-1222 Manual Del Usuario página 2

Figure 3
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
4. Place lower shelf (4) across braces of legs. Attach
lower shelf using six nuts and bolts. Now, fully fasten
hardware placed in step 3. (See Figure 2)
5. To attach tabletop (5) to frame assembly, place
tabletop on a smooth, non-marring surface with top
side facing down.
6. Rotate the assembled frame upside down and line
up with the pre-drilled holes on the bottom side of
the top.
NON-STEEL TOP ASSEMBLY
Figure 2
(Composite Wood, Laminate, Maple, Stainless Steel, ESD)
1. Using 24 wood screws, attach legs to the under side
of the top (5) through pre-drilled holes. (See Figure 3)
2. Set bench assembly upright and recheck all nuts,
bolts and screws for tightness.
STEEL TOP ASSEMBLY
Hardware pack includes:
1. Align leg holes to end of tabletop. Secure with six
1/4"-20 x 5/8" bolts. Threaded inserts are provided on
each tabletop end. (See Figure 4)
2. Set bench assembly upright and recheck all bolts
for tightness.
1-800-295-5510
uline.com
DESCRIPTION
1/4"-20 x 5/8" Bolts
1/4"-20 Nuts
Lock Washers
NOTE: There are two mounting channels
provided for installing an optional cabinet or
drawer.
QTY
41
29
29
0421 IH-1222