Cleaning The Grease Collection Tray; Storing The Device - Bartscher Panini 1RDIG Manual De Instrucciones Originales

9. Carefully remove coarse soiling by the supplied brush (17).
10. Empty and clean the grease collection tray (8).
11. After cleaning, dry and polish the surface (12, 15) with a dry, soft cloth.
12. Make sure that the device has been properly cleaned before leaving it in a dry place.

6.2. Cleaning the grease collection tray

NOTE!
Incorrect use may cause damage.

Empty and clean the grease collection tray after each use.
At the front of the lower grill plate (9) there is the grease collection tray (8) collecting the
dripping fat and other liquids.
1. Set the ON/OFF switch (1) to its O position. The device is switched off and the green
power indicator light in the ON/OFF switch (1) is not lit.
2. Pull the plug from the socket.
CAUTION - HOT SURFACE
Risk of burns by hot surfaces and fat!
The casing and grill plates remain hot after the device has been switched off.

Protect your hands and face from possible fat splashes.

Do not touch any surfaces.
3. Leave the device and grease collection tray (8) to cool down completely.
4. Remove the grease collection tray (8) with the handles of the device.
5. Clean the grease collection tray (8) with warm water and soft cloth.
6. Dry the grease collection tray (8) with a dry, soft cloth.
7. Insert the higher side of the grease collection tray (8) at the front of the lower grill
plate (9).

6.3. Storing the device

If the unit is to remain unused for a longer period of time, clean it according to the
instructions and store in a dry, clean place, safe from frost and sun and inaccessible to
children. Do not place any heavy objects on the device.
- 34 -