Publicidad
CONTENTS
A Assembly instructions
Assembly
Electrical connections
Applications
Limits regarding environmental conditions
Packing list
B Using the machine
Checks to be made before using the machine
General characteristics
C Instructions
D Safety measures
E Maintenance
G Exploded (assembly) drawing (See back of the Catalogue).
A. ASSEMBLY INSTRUCTIONS
Assembly
When unpacking the machine make sure that no parts have been
damaged or broken. In the event that damage has occurred,
replace the broken parts with original spare parts. Replace
electrical components with approved parts that have the same
rating (if there are any doubts, consult the manufacturer).
Mount the handle (A) in position using the screw (B) by
overcoming the snap type safety system (Fig. 4).
Electrical connections
Make sure that the voltage and frequency of the machine as
indicated on the characteristics plate coincide with the mains
supply being used.
Packing list
230 V. / 50Hz
RUBIMIX-25-N
61925
RUBIMIX-50-N
61950
B. USING THE MACHINE
Checks to be made before using the machine.
Before using the machine, make sure that no parts are worn or
damaged. Immediately repair or replace any worn or damaged parts.
Make sure that the voltage and frequency of the mains supply
coincide with those indicated on the characteristics plate of the
machine.
The machine is started and stopped by means of the two-position
switch (O-I). The mains power supply should include an earth
connection and protection against earth leakage (differential circuit
breaker). In the event of any failure in the power supply, reset this
circuit breaker before attempting to restart the machine.
General characteristics
Blade speed
Mixing capacity
Drum capacity
Weight
Size
Motor drive shaft power
Reduction
Power consumption
Speed
Electrical connections
ENGLISH
All manuals and user guides at all-guides.com
During transport always roll up the power supply cable. Never
move the machine by pulling on the power cord.
Applications and use
Rubimix-25-N and Rubimix-50-N are professional precision
machines for mixing all type of building materials.
Limits regarding environmental conditions
Pay close attention to the conditions of the working area. Make
sure the area is clean and well lit. The machine should always
be kept clean to guarantee maximum performance in the safest
possible working conditions.
230 V. / 50Hz
230 V. / 50Hz
U.K.
CH
61928
61927
61953
61952
When using an extension cord, make sure that the conductor cable
section is not less than 2.5 mm. The RUBIMIX Mixing machine is
fitted with the following safety devices: Thermal circuit breaker that
protects the motor against damage in the event the blades jam. An
electrical protection system that prevents the machine being
operated if the blades are not inside the drum. The safety system
stops the RUBIMIX mixer if any attempt is made to raise the blades
while they are in operation.
For easier storage, dismantle the handle (A) by releasing the snap
safety system to free the screw (B) (Fig. 4).
RUBIMIX-25-N
60 r.p.m.
25 Kg
40 L.
27.5 Kg
510 x 600 x 600 cm.
862 W
25:1
1173 W
1.500 r.p.m.
Completely impervious to water and dust
220 V. / 60Hz
120 V. / 60Hz
USA
61926
61929
61951
61954
RUBIMIX-50-N
60 r.p.m.
50 Kg
65 L.
31 Kg
545 x 640 x 640 cm.
862 W
25:1
1173 W
1.500 r.p.m.
Completely impervious to water and dust
380 V. / 50Hz
3F
61956
Publicidad
