English; Chest Belt - DeRoyal MEDIROYAL ErixOne Manual Del Usuario

All manuals and user guides at all-guides.com
The ErixOne Shoulder Brace · English
The ErixOne shoulder brace by MediRoyal is a unique brace that can be used to
support and stabilize shoulder joints. The brace has a sophisticated design that combines
mechanical stability, heat insulation, proprioceptive feed-back, range of motion control,
suspension and support of the shoulder joint. Follow the step by step instruction to
reach maximum performance and function.
A. Shoulder Brace
Start with selecting the right size with the help of the measurement chart. You will
get the best effect if the brace is used directly onto the bare skin. The back side has
silicone straps that will grip the skin for better bio-feedback. If you fi nd this to be
uncomfortable a t-shirt can be worn under.
1. Open the buckle on the front side of the brace. Open all hook and loop
closures on the arm piece then slide the brace up the arm.
2. Close the hook and loop straps on the arm piece. Make sure that the tongue
covers the skin when the hook straps are attached to avoid discomfort.
3. Grab the buckle on the back side.
4. Pre-stretch the back side of the brace by pulling the strap. This step is important
for the function of the brace.
5. Attach it under the arm-pit maintaining the pre-stretch in the strap. The material will
grip the skin and will help to hold the brace in place.
6. Secure the pre-stretched strap by pinching it with your upper arm against the body.
7. Attach the buckle and open the hook on the strap.
8. Adjust the strap and close the hook.
9. When the brace has been correctly applied you should now feel a slight pull from
the back side. The brace provides stability to the shoulder joint up to 70 degrees
shoulder abduction.
B. Chest Belt
To further stabilize the shoulder and restrict range of motion a chest belt can be used
along with two semi-elastic straps. The belt will work as an anchor connecting the upper
arm with the body. The straps are in two different widths and can be used both as an
individual crisscross anchor and to reinforce the shoulder with a tape-like function.
The straps are semi-elastic and will not provide a fi rm fi xation point. The strap will slow
down the movement of the arm.
1. Attach the chest belt around the body. There are two reinforcement straps attached
onto the belt. Slide that side towards the shoulder brace. The belt is made of a skin
gripping material with a loop cover. It can be trimmed individually, both in length
and width.
C. To Restrict Shoulder Abduction
2. Use the wide strap. Attach the mid portion of the strap on the loop-piece on
the arm.
3