Uline H-8961 Manual Del Usuario página 2

Base x 1
1. Align caster plate with bolt holes on base. Insert four
bolts through base into caster plate. Attach bolts
with lock washers and nuts. (See Figure 1)
Figure 1
NOTE: Before setting charging cabinet on
mobile base, please make sure all contents
are removed from cabinet.
1. Engage brakes on all four casters of mobile base.
2. Using two people, carefully lift cabinet onto mobile
base, making sure cabinet rests within outer lip of
base. (See Figure 2)
PAGE 2 OF 6
MOBILE BASE PARTS LIST
Caster with Brake x 4
MOBILE BASE ASSEMBLY
CABINET TO BASE ASSEMBLY
1-800-295-5510
uline.com
Bolt x 16 Lock Washer x 16
2. Tighten nuts with 14 mm wrench.
3. Repeat for remaining casters.
Figure 2
Nut x 16
1120 IH-8961