Using The Contour Attachment - ViSAGE 94140 Manual Del Usuario

automatically light up (see Fig. D). The trimmer is
ready to cut nose and ear hair.
3. Switch off the trimmer after each use by sliding the
on/off switch down.

Using the contour attachment

CAUTION!
Risk of injury!
If you do not use the trimmer properly, you
may cause cuts or other injuries.
− Do not guide the trimmer from the bot-
tom up or sideways.
The contour attachment
trimming eyebrows and difficult-to-access areas and to
shorten or shape (small) beards and sideburns.
1. Switch off the trimmer.
2. Turn the nose/ear hair attachment
wise (bayonet catch) to remove it from the trimmer
(see Fig. F).
3. Align the contour attachment so that it can be slotted
into the bayonet catch (see step 1, Fig. H).
4. Twist clockwise to secure the contour attachment
(see step 2, Fig. H).
5. Position the trimmer on the hairline at a right angle
and slowly pull downwards. Repeat till desired trim
is achieved.
7 is especially suited to
Operations
counterclock-
1
17