Troubleshooting - DeLonghi HCX9115E-6A AG Manual Del Usuario

TROUBLESHOOTING

PROBLEM
The appliance doesn't work
The display shows a blinking
dot and you hear an intermittend
"beep"
The display shows "PF"
The display shows "Ht" blinking
CAUSE
Be sure it is plugged in and that the electrical
outlet is working
The temperature may be set too low
The Key lock may be activated
The appliance could be tipped over or is
positioned in an improper way
The temperature sensor is malfunctioning
The internal temperature is too high.
The air intake or outlet grille is obstructed
8
SOLUTION
Plug into the power outlet
Set the temperature to a higher
position
See the section "Key lock"
Make sure the appliance is standing
upright on a flat surface. Position the
appliance correctly
Contact the De longhi toll free number
Check the appliance is correctly
positioned respecting the minum
distances from the wall, or objects, as
indicated on the instruction manual, if
not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet and
let the appliance cool down. After few
minutes plug the appliance again. If the
appliance doesn't work please contact
the De longhi toll free number