Specifications; Maintenance; Battery Replacement - King Innovation KING AL Manual De Instrucciones

Specifications

Transmitter Frequency: 1748 Hz
Transmitter Power: 750 Vpp, 285 Vrms
Case Dimensions: 23" (584mm) x 10.5" (267mm) x 4.2" (107mm)
Battery: Eight (8) D-cells and one 9V
Battery Life: Receiver/Transmitter: 50 hours nominal

MAINTENANCE

Prior to removing the case or battery cover, power off
unit then remove the test leads from the circuit.
Failure to observe this warning could result
in severe injury or death.

BATTERY REPLACEMENT

Transmitter
1. Turn the unit off.
2. Remove the battery cover.
3. Install/replace the eight (8) D-cell batteries. (Observe polarity)
4. Replace the battery cover.
Receiver
1. Remove the screws from both sides of the receiver.
2. Install/replace 9V battery. (Observe polarity)
3. Replace cover and screws.
Cleaning
Occasionally wipe down the device with a damp cloth and a mild
detergent. Abrasives or solvents should not be used or come into
contact with this device.
WARRANTY
King Innovation
workmanship for a period of one year from date of purchase. Contact
factory for full warranty information.
For technical support, service inquiries or warranty requests,
call (877) 771-8885 or email kingservicecenter@ecmindustries.com.
WARNING
ELECTRIC SHOCK HAZARD
products are guaranteed against faulty materials or
®
KING INNOVATION
KING AL
I
11