Cleaning And Maintenance; Technical Data - Blaupunkt BP3035 Manual Del Usuario

11. When cutting, move the tool in a direction opposite to that in which the disk is rotating.
12. The tool may be used as a grinder or as a cutter.
13. Do not cut or machine light metals with a magnesium (Mg) content exceeding 80%, as such metals are flammable.
14. Do not cut objects thicker than the cutting depth of the disk.
15. Do not cut hard material thicker than 20 mm.
16. Ensure that the workpiece is securely fixed.
17. Have the carbon brush in the motor replaced without delay when it becomes necessary to do so.
18. The tool works with maximum grinding wheels thickness 6 mm and 125 mm in diameter.
19. The user-replaceable parts include the grinding/cutting disk, disk guard and side handle. Contact the service for
carbon brush replacement or repair.
CAUTION

CLEANING AND MAINTENANCE

ATTENTION! BEFORE PERFORMING ANY WORK ON THE EQUIPMENT, PULL THE POWER PLUG.
• Keep the ventilation slots of the machine clean to prevent overheating of the engine.
• Regularly clean the machine housing with a soft cloth, preferably after each use.
• Keep the ventilation slots free from dust and dirt.
• If the dirt does not come off use a soft cloth moistened with soapy water.
NEVER USE SOLVENTS SUCH AS PETROL, ALCOHOL, AMMONIA WATER, ETC. THESE SOLVENTS MAY DAMAGE THE
PLASTIC PARTS.
LUBRIFICATION
• The machine does not require any specific lubrication.

TECHNICAL DATA

Voltage / frequency
Power input
No load speed
Max. disc diameter
Drive spindle thread
• Noise values measured according to relevant standard (K = 3).
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION!
THE SOUND POWER LEVEL MAY EXCEED 85 DB(A), IN THIS CASE INDIVIDUAL HEARING PROTECTION SHALL BE WORN.
SERVICE
• The device does not contain any user-serviceable parts. Do not attempt to make any repairs. Just call the Service. Any
irregularity noticed during operation or maintenance of the tool is an indication that the product should be returned to
the service for repair.
STORAGE
• Clean the device according to the instructions and leave until it is thoroughly dry. It is recommended that the device be
stored in its original package.
• Store the device in a dry and well-ventilated place inaccessible to children.
• Protect the device from vibration and shock during handling and transport.
.
All manuals and user guides at all-guides.com
230-240 V / 50 Hz
1200 W
0-12.000 min-1
Ø 125 mm
M 14
89 dB(A)
100 dB(A)
EN