Kunft KVH3935 Manual De Instrucciones página 15

Make sure the worktop is at least 30 mm thick. Please select heat-
resistant worktop material to avoid warping caused by the heat
radiating from the hob. This is shown below:
(mm)
Make sure the ceramic hob is
always well ventilated and that
the air inlet and outlet are not
blocked. Make sure the ceramic
hob is in good working order.
This is shown below
Note: The safety distance bet-
ween the hob and the unit
above the hob should be at least
760 mm.
A (mm)
Before positioning the fixing brackets
The unit should be placed
on a stable, smooth surface
(use the packaging). Do
not press on the controls
protruding from the hob.
fix the hob to the worktop by screwing on the four brackets under the
hob (see diagram) once it has been positioned.
Placa-Vitro-KVH1966-Manual-4.indd 15
ceramic hob
L W
(mm) (mm)
590 520
B (mm)
760 50 min
A
Screw bracket
H D
(mm) (mm)
55 51 560
C (mm) D
30 min air intake
B C
Screw hole
15
KVH3935
A B
(mm) (mm)
490 50 min
E
air outlet 10 mm
D
base
EN
X
16/04/12 19:27