Operating Instructions; Using The Touch Controls; Using Your Ceramic Hob - Kunft KVH3935 Manual De Instrucciones

Make sure that the base of your pan is smooth, sits flat on the hob,
and is the same size as the cooking zone. always center your pan
on the cooking zone.

2.2. operating Instructions

using the touch controls

• The appliance has touch controls; no pressure is needed to operate
them.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a
touch control is used.
• Make sure the controls are always clean and dry, and that there is
nothing covering them (a utensil or a cloth for example). even a thin
film of water may make the controls difficult to operate.

2.2.1. using your ceramic Hob

to start cooking
• When the hob is switched on, the buzzer beeps once, all the
1. Touch the ON/OFF
show "-".
2. Place a suitable pan on the cooking zone that you
intend to use.
• Make sure the bottom of the pan and the surface
Placa-Vitro-KVH1966-Manual-4.indd 9
ceramic hob
indicators light for 1 second then go out, indicating that the
ceramic hob is in standby mode.
of the cooking zone are clean and dry.
KVH3935
always lift pans off the ceramic hob
– do not slide, as this may scratch
the glass.
control. all the indicators
9
EN
16/04/12 19:27