Safety
to comply with a safety limit of
1.6 watts per kilogram (1.6 W/
kg). The FCC exposure limit
incorporates a substantial margin
of safety to give additional
protection to the public and to
account for any variations in
measurements.
Tests for SAR are conducted
using standard operating
positions specified by the FCC
with the phone transmitting at
its highest certified power level
in all tested frequency bands.
Although SAR is determined
at the highest certified power
level, the actual SAR level of the
phone while operating can be
well below the maximum value.
Because the phone is designed
to operate at multiple power
levels to use only the power
required to reach the network,
in general, the closer you are to
a wireless base station antenna,
the lower the power output.
Before a phone model is available
for sale to the public, it must be
tested and certified to the FCC
that it does not exceed the limit
established by the government-
adopted requirement for
110
All manuals and user guides at all-guides.com
safe exposure. The tests are
performed in positions and
locations (e.g., at the ear and
worn on the body) as required by
the FCC for each model.
This device was tested for
typical body-worn operations
with the back of the phone kept
0.59 inches (1.5 cm) between
the user's body and the back of
the phone. To comply with FCC
RF exposure requirements, a
minimum separation distance
of 0.59 inches (1.5 cm) must
be maintained between the
user s body and the back of the
phone. Third-party belt-clips,
holsters, and similar accessories
containing metallic components
should not be used. Body-worn
accessories that cannot maintain
0.59 inches (1.5 cm) separation
distance between the user's
body and the back of the phone,
and have not been tested for
typical body-worn operations
may not comply with FCC RF
exposure limits and should be
avoided.
The FCC has granted an
Equipment Authorization for this
model phone with all reported