Tabla de contenido
Publicidad
(EN) This manual contains important information on safety, use and
maintenance. Read the manual carefully before using the scooter for
the first time and keep it to hand for consultation whenever necessary.
IMPORTANT MESSAGE TO PARENTS:
For your child's safety, it is your responsibility to read this information
together with the child and make sure they understand the instructions
and warnings on use and safety.
We recommend that you re-read the information in this manual
regularly and remind your children about the content. Furthermore, we
suggest that you check the scooter regularly to ensure it remains safe
to use.
GENERAL WARNING: Riding a scooter can be dangerous even when
doing so in ideal circumstances. This manual contains numerous
warnings on the possible harm that can be caused due to a lack of
inspection and maintenance of the scooter. Many of the warnings refer
to a loss of control and falling off. Due to the fact that any fall can lead
to serious harm and even death, this warning is not repeated each time
the risk of falling off is mentioned.
Check local regulations to find out where the use of scooters is
permitted.
1. Parts and Components
A. Spring buttons
B. Front wheel
C. Fork
D. Frame
E. Handlebar grip
F. Spring buttons
G. Handlebar
H. T-Tube
I. Quick-release coupling
J. Spare wheel
K. Coupling
L. Deck
M. Rear wheel
ASSEMBLY
WARNING: If the handlebar T-tube clamp is not installed and tightened
correctly, the rider may lose control and fall off. Assembly should be
performed by an adult with mechanical experience. If you do not
understand these instructions or the "tighten securely" concept, you
should ask for help from a qualified mechanic.
2. ASSEMBLY INSTRUCTIONS:
A. Screw the T-tube assembly onto the external thread of the fork.
B. With the front wheel facing forward and the handlebar perpendicular
to the wheel, tighten the clamp as shown. Tighten it securely.
C. Align the spring buttons with the holes on the T-tube and insert the
handlebar until the spring buttons click into place.
D. Adjust the height of the handlebar so that the spring buttons
coincide with the holes in the tube by using the quick-release clamp.
Push the clamp closed to set the T-tube in position.
WARNING: If the spring buttons do not click into place correctly, there
is a chance that the handlebar will come lose while using the scooter,
leading to a loss of control and harm to the child. When the buttons are
in place correctly, the handlebar should not rotate or move to either
side. When they are in place correctly, check that the spring buttons
can be clearly seen through the holes in the T-tube, as shown in photo
C.
WARNING: If the quick-release clamp is not in the correct position, the
T-tube could extend or contract causing the child to lose control of the
scooter and fall. When the quick-release clamp is in position correctly,
the handlebar should not move either up or down.
SAFETY ADVICE
● Do not use the scooter when it is getting dark or at night.
WARNING: Do not use the scooter on wet or slippery surfaces or on
icy ground. The scooter could lose traction and you could fall.
● Always wear appropriate protective equipment, such as an approved
helmet. We recommend wearing shirts or long-sleeved t-shirts, gloves,
long trousers, shoes, knee pads and elbow pads. Wear trainers
(lace-up trainers with rubber soles).
Do not use the scooter while barefoot or in sandals.
● Avoid puddles, potholes, sand, gravel or any other surface element
that could cause you to slip and fall.
● Tighten all the screws and ensure that the cylinder, the T-tube
extension and the handlebar are securely fastened in place before
riding.
● Do not make any changes to the scooter.
● Keep hold of the handlebar at all times.
● Do not ride in busy public areas. Check that the location is safe for
riding the scooter.
● Do not ride down slopes or hills.
● The scooter can support a maximum weight of 20kg.
● Use with caution. Skill is required to avoid falling off or physical harm
to both rider and others.
● Riding the scooter on public roads could have serious
consequences.
WARNING: Only ride on hard smooth surfaces. The scooter is not
designed for off-road use, steep slopes or indoors. Ride with extreme
caution when close to the curb, on irregular pavement surfaces, areas
with potholes or in other similar situations.
Maintenance
Keep the scooter clean. Wipe with a damp cloth to remove dust and
dirt.
IMPORTANT WARNINGS
Read this user manual carefully before starting to assemble.
When unpacking the scooter, try not to misplace or lose the small
parts.
Assembly should be performed by an adult with mechanical
experience.
Do not allow more than one child to use this product at the same time.
3
Publicidad
Tabla de contenido
