Preparing Maintenance Work; Finishing Maintenance Work - Dometic TEC40D Instrucciones De Uso

Servicing the generator
10.2

Preparing maintenance work

!
CAUTION!
Note the following for all maintenance work:
 The generator must not be running.
 All the parts must be cooled down.
➤ Open the generator cover.
➤ Switch the generator to no function with the main switch (fig. 2 1,
page 3).
➤ Disconnect the positive terminal of the supply battery.
For maintenance work, you can take the generator out:
!
WARNING!
The mounting plate with generator is very heavy (> 90 kg) and
could fall out the housing if you take it out too far.
➤ Undo the fastening screw (fig. 5 1, page 5).
➤ Remove the mounting plate (fig. 5 2, page 5) with the generator from the
housing.
10.3

Finishing maintenance work

➤ Connect the generator to the positive terminal of the supply battery.
➤ Switch the generator to standby with the main switch (fig. 2 1, page 3).
➤ Close the generator flap.
22
TEC40D
EN