Uline H-7011 Manual Del Usuario página 3

9. While facing the front of the cabinet, add hinges to the
top two and bottom two holes on the front right leg of
the cabinet using four bolts and four nuts.
a. Ensure proper hinge configuration. (See Figure 6)
b. Slotted holes should connect to the frame of the
cabinet. (See Figure 6)
c. Round holes should connect to the door panel.
(See Figure 6)
Figure 6
10. Attach door panel to hinges using four bolts and four
nuts. (See Figure 7)
Figure 7
PAGE 3 OF 9
ASSEMBLY CONTINUED
11. Attach padlock hasp to left front leg of the cabinet
using the middle holes and two bolts and two nuts.
(See Figure 8)
Figure 8
12. Ensure cabinet is settled properly and tighten all
remaining bolts.
1-800-295-5510
uline.com
NOTE: If cabinet is not settled properly,
untighten and retighten bolts.
0721 IH-7011