EN
13 Operating instructions
NOTE!
Only use the appliance when all parts are
completely and correctly assembled.
If in doubt, have it checked and
assembled by a qualified professional.
Before each use, make sure that the
appliance is in good condition and that
the mains power cable is not damaged.
If the cable is damaged, you must have
it replaced by the manufacturer or the
service centre or by someone with a
similar qualification to prevent any
hazards.
• Place the vacuum cleaner on the
floor.
• Insert the suction nozzle of the
flexible hose (14) into the hose
connection (4) of the vacuum
cleaner housing. The hose must
click in.
• Push the handle of the hose onto
the telescopic tube (15).
• Attach the desired suction nozzle
to the other end of the telescopic
tube.
• Use the floor nozzle (16) to clean
dusty carpets or hard floors.
• For corners that are difficult to
reach, use the crevice nozzle (17).
• For delicate or shaped objects, use
the circular brush (18).
• Carpet floor nozzle (16): step on
the switch to adjust the position of
the brush to "
suitable for parquet and soft
surfaces such as floors or tiles. For
carpets or mats, step again on the
brush "━".
• The crevice nozzle (17) is suitable
for corners or hard to reach
places.
• The parquet nozzle (19) is best
suited for smooth floors.
• Unwind the cable completely.
• Insert the plug into the socket,
press the ON/OFF button (12).
• When using the appliance, make
sure that the flexible hose is not
blocked, twisted or trapped.
• To switch off the vacuum cleaner,
press the ON/OFF button (12),
disconnect the plug from the
socket and wind up the cord using
the cable rewinder (7).
Seite | 24
". This position is
• Easily carry the floor vacuum
cleaner by the handle.
14 Cleaning and
maintenance
Replacing the HEPA filter
The HEPA filter is used to filter out
viruses, respirable dusts, dust mite eggs
and excretions, pollen, smoke particles,
asbestos, bacteria, various toxic dusts
and aerosols from the air.
NOTE!
DANGER DUE TO
INCORRECT OPERATION!
The HEPA filter must be replaced every 6
months.
Motor protection filters must be replaced
every 10 months. A replacement filter
set consisting of:
5x
vacuum cleaner dust bags
1x
motor protection filter,
1x
HEPA filter
Available at
www.ggv-service.de