Novy 2140 Hoja De Características página 14

Programming the duration and automatic
stop
1 Press the MODE button until the indicator
next to the symbol begins to flash.
2 Select the length of cooking time pressing
the "+" or "–" buttons.
3 Subsequently, the indicator that was flash-
ing will remain lit.
4 Press the mode button until the indicator
next to the symbol begins to flash.
5 Select the time that cooking should finish
pressing the "+" or "–" buttons.
6 Subsequently, the indicator that was flash-
ing will remain lit.
7 Select a function and cooking temperature.
8 The oven will remain disconnected with the
indicators next to the
lit. Your oven is programmed.
9 When the time to begin cooking is reached,
the oven will switch itself on and will con-
tinue cooking during the programmed time.
10 When the programmed finishing time is
reached, the oven will disconnect, an alarm
will sound and the light next to the
bol will begin to flash.
14
All manuals and user guides at all-guides.com
and symbols
sym-
11 Press any button to switch off the alarm
and the oven will reconnect.
12 Set the controls to the position
switch of the oven.
Caution
Pressing the MODE button the display on the
screen shows any function programmed. It
can be changed by pressing the "+" or "–"
buttons. On selecting the desired function,
the indicator next to the corresponding sym-
bol will light.
In the event of a power cut, all the program-
ming of the electronic clock will be erased.
The correct time has to be reset and the
watch reprogrammed.
MODE
to