Product Description And Control Panel; Use And Operation - Klarstein 10028027 Manual Del Usuario

Product Description and Control Panel

1. LED-Display
2. Light
3. Cool fan
4. Shelf
5. Foot
6. Hinge cover
7. Glass door
8. Light
9. °C/°F Button
10. LED-Display
11. Temperatur UP
12. Temperatur DOWN
• The inside temperature of the unit depends on the room temperature. The wine cooler can be adjusted in
the range 8°C to 18°C (± 1°C), when is is located in an idael room tamperature of 25°C. By first time turn on,
without putting any bottle inside the wine cooler, the product can be cooled to 15°C in 1.5 hours and after
2-2.5 hours more will reach to the temperature programmed.
• You could set the temperature by touching the arrow buttons with your finger. When the inside temperature
is higher than the setting point, cooling system will work normally. When the inside temperature is lower
than the setting point, the system stops working and the temperature will raise. When it raises above the
setting point, cooling system starts to work again, te cellar enters into cooling circles.
• The unit das a LED light located on the top of the cavity interior. You can turn the interior light on and off by
pressing the light button.
• When you press both arrow buttons for 3 seconds at the same time, you get the temperature readout either
in °F or °C.
All manuals and user guides at all-guides.com

Use and Operation

6