Cleaning And Care; Disposal And Declaration Of Conformity - Klarstein 10028027 Manual Del Usuario

Shut off the power supply before cabinet cleaning. Take out wine and shelves and then clean the cabinet with
clean water. Do not use soap water or detergent for the cabinet. Clean teh cellar regularly.
No cooling Plug not put in.
Low voltage.
Fuse broken.
Not cold The wine cooler is placed too near
enough heat sources.
temperature
Bad ventilation.
inside
Fans don't work.
The door is not closed tightly or
opened too frequently or for too long
time.
Smells Sour inside.
inside light Set temperature higher than inner
flash temperature.
The automatic defrost function starts
to work.
Frost on the Too much humidity or too low tempe-
cold sink. rature inside the case.

Disposal and Declaration of Conformity

According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Producer: CHAL-TEC Vertritebs- + Handels GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)
7
All manuals and user guides at all-guides.com

Cleaning and Care

Troubleshooting
Put in the plug.
Ensure normal voltage.
Change fuse.
Keep the wine cooler away from sunshine or other
heat source.
Place the wine cooler in the area with good ventila-
tion and keep things away from the fans.
Check wheter the plug is connected.
Close the door tightly and don't open the door to
frequently or for long time.
Wrap the source or take it out.
Adjust the adjustor.
Normal function, no repair needed.
Output the plug, stop the power and defrost by
hand, connect power again when the ice thaws.