Cleaning & Care; Cleaning And Maintenance - Black and Decker BEAC75 Manual De Instrucciones

CLEANING & CARE

CLEANING AND MAINTENANCE

Be sure to unplug from the electrical supply source before cleaning.
CLEANING THE EXTERIOR
• The exterior of the evaporative air cooler should be cleaned with a damp cloth. Do
not use any harsh detergents or solvents.
• See the Evaporative Air Cooler Set-up section on page 7 for instructions on how to
access the water tank, cooling pad and filter.
CLEANING THE WATER TANK
• The water tank should be emptied regularly. Clean the water tank with a mild
soap and water solution. Rinse and dry thoroughly before adding clean water and
reinstalling in the unit.
CLEANING THE COOLING PAD AND FILTER
• The cooling pad and filter should be cleaned at least once a month. If they are dirty
or clogged it will effect the performance of the air cooler. They can be rinsed with
running water. A brush can be used to remove dust or residue. Air dry before
re-installing.
• It is recommended that you replace the cooling pad approximately every 6 months
depending on usage and mineral content of the water.
If the evaporative air cooler will not be used for a long time, make sure there is
no water in the tank. The air cooler, including the filter and cooling pad should be
clean and completely dry. Pack the unit to prevent dust from entering for long term
.
storage
REPLACEMENT COOLING PAD
Use Replacement cooling pad model EF1. To purchase a replacement cooling pad,
it is recommended that you check with the retailer where you purchased your
evaporative air cooler, or online retailers. You can also contact the BLACK+DECKER
Customer Satisfaction Center at 844-299-0879 or service@equitybrands.com.
Page 12