KENMORE ELITE BC7005 Manual De Uso Y Cuidado página 14

CROSSOVER BARE FLOOR NOZZLE
WARNING
Electrical Shock Hazard
To reduce the risk of electric shock – DO
NOT use on wet surfaces.
The floor brush is connected to the
PowerMate for quick transitions from carpet
®
to bare floor cleaning.
NOTE: Turn off vacuum cleaner before
removing floor brush from PowerMate
To remove the floor brush, press brush
release pedal on the PowerMate
brush out of PowerMate
Brush
Release
Pedal
To replace, insert the floor
brush into the PowerMate
until floor brush locks
into place.
.
®
. Lift floor
®
.
®
®
FAN TOOL
The fan tool will
attach to the handle
or wand for over-
head cleaning of
furniture such as
cabinets and shelves.
1. Rotate the fan tool
and lock into place.
2. Attach the fan
tool to the handle or
wand.
WAND (TELESCOPING)
The wand length is
adjustable and
requires no assembly.
To adjust, simply
push on the wand
length adjust button
and slide the upper
wand to the desired
height.
WAND LIGHT
This vacuum cleaner is equipped with a
light on the extension wand. The light can
be used for lighting hard to reach
locations. The wand light will operate
only when the vacuum
cleaner is in CARPET
setting. The light will
operate when attached
or not attached to the
PowerMate .
®
- 14 -
Wand
Length
Adjust
Button
Wand
Light