User Preferences - Kenmore 596.57002600 Guía De Uso Y Cuidado

Temperature Controls
Temp Alarm
The Temp Alarm system will alert you if the
freezer or fresh food temperatures exceed normal
operating temperatures due to a power outage or other
event. When activated, the Temp Alarm light will
illuminate.
If the freezer or fresh food temperatures have
exceeded these limits, the display will alternately show
the current compartment temperatures and the highest
compartment temperatures reached when the power
was out. An audible alarm will sound repeatedly.
Press the Temp Alarm pad once to stop the audible
alarm. The Temp Alarm light will continue to flash and
the temperatures will alternate until the temperatures
have stabilized.
To turn off Temp Alarm, press and hold the Temp
Alarm pad for three (3) seconds. The indicator light
will go off.
Door Alarm
The Door Alarm will alert you when one of the
doors has been left open for five continuous minutes.
When this happens, an audible alarm will sound every
few seconds until the door is closed OR press the
Door Alarm pad to deactivate the feature.
Rapid Cool
When activated, Rapid Cool causes the fresh
food and freezer temperatures to drop to the
minimum settings on the control. This cools down the
refrigerator and freezer after extended door openings
or when loading the refrigerator or freezer with warm
food. Important: When the Rapid Cool feature is in
operation, the and
and freezer controls will not operate.
To activate, press the Rapid Cool pad. Rapid Cool will
deactivate automatically after 12 hours, OR press the
Rapid Cool pad to deactivate the feature.

User Preferences

Access the User Preferences menu to:
• Change the temperature display from °F to °C.
• Enable or disable audible alarms.
• Adjust the light level at which the Dispenser Auto
Light will illuminate (when this feature is activated on
the ice and water dispenser).
• Activate the Sabbath Mode.
14
All manuals and user guides at all-guides.com
pads for the refrigerator
To access the User Preferences menu, press and hold
the Door Alarm pad for three (3) seconds. When in
the User Preferences mode, a short title for the feature
will appear in the Freezer temperature display and the
feature status will appear in the Fresh Food display.
1. Use the Freezer
through the features.
2. When the desired feature is displayed, use the
Refrigerator and
status.
3. When changes are complete, press the Door
Alarm pad for three (3) seconds OR close the
Fresh Food door.
Temperature Display (F_C)
Change the display to show temperatures in degrees
Fahrenheit or degrees Celsius.
Alarm (AL)
When the Alarm mode is OFF, all audible alarms will
be disabled until the feature is turned on.
Auto Light Level Selection (LL)
This setting adjusts the light level at which the
dispenser light will illuminate when the sensor detects
that the light levels in the room are low. Setting 1 is
the darkest light level setting, setting 9 is the lightest
light level setting. Important: The Auto Light (select
models) must be activated on the ice and water
dispenser control to take advantage of this option.
Sabbath Mode (SAB)
When the Sabbath Mode is ON, all control lights and
the night light will be disabled until the feature is
turned OFF. This feature does not disable the interior
lights. Press ANY pad to restore the control lights.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be
warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the
cabinet. This condition will be more noticeable when
the refrigerator is first started, during hot weather and
after excessive or lengthy door openings.
and control to scroll
control to change the