First Power-Up And Synchronisation - dBTechnologies RS16000TR Manual Del Usuario

3. FIRST POWER-UP AND SYNCHRONISATION

At the first power-up follow the steps indicated here below (they refer to a first use with the supplied antennae):
a) on the front side, insert and screw the supplied antennae in the relevant BNC connectors of A6W.
b) on the back, insert the supplied VDE cable (duly connected to the power mains) and press the ON button. The
RPS10 LEDs will indicate the powering of all RS16000TR sections in sequence.
c) on the front side, the AS6W LEDs indicate that the antennae are powered. The displays will light up. In
particular, those of the RS16000R receivers show a screen similar to that shown in the figure.
RS16000TR
32
ON/OFF
VDE
Tx Name
ITA
bank i3 (67) 01
channel 01
Freq 470.100 MHz
English
English
Cod. 420120285 REV. 1.0