Multi-Microphone Systems - dBTechnologies RS16000TR Manual Del Usuario

8. MULTI-MICROPHONE SYSTEMS

In case of connection over the network
of two or more RS16000TR devices it is
necessary to use a router connected to
a PC. The control through dB Wireless
Manager software means a great
advantage both in terms of controlling a
complex system in real time and saving
time during system configuration:
• once the network is correctly
configured (for example with a
modem with enabled DHCP function),
all receivers are immediately detected
with the Discovery function
• a scan is carried out through the
Autoset function with a single
command and the channels are
automatically assigned to each
receiver
• the transmitters must then be
synchronised with local procedure
through I.R interface
• then it is possible to monitor the
status of each receiver in a distributed
system, also a big sized one.
The figures next to this paragraph show
an example with 3 RS16000TR devices and
2 pages of the software:
Fig. 1
3 RS16000TR devices have been detected
through Discovery and connected by
pressing the Connect keys. Note that the
DHCP protocol has automatically assigned
the IPs:
192.168.1.121
192.168.1.122
192.168.1.123
Fig.2
Click on the relevant pages to open the
control pop-ups that allow monitoring
and configuring the single receivers.
For further detailed information on
"dBTechnologies Wireless Manager" a
quickstart is available in the main page of
the software (button "?")
RS16000TR
40
English
Fig. 1
Fig. 2
Cod. 420120285 REV. 1.0
English