Uline H-5860 Manual Del Usuario página 2

1. Insert a locking caster (C) into one end of the
base (B). Ensure caster is secure.
2. Insert a non-locking caster (D) into the other end
of the base (B). Ensure caster is secure.
3. Repeat steps 1 and 2 with second base.
4. Lay the board on its side with someone holding it
in place.
5. Insert plastic spacers (G) in openings at bottom of
vertical board supports.
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS
6. Align one base perpendicular to the board,
7.
8. Return the partition to a standing position.
1-800-295-5510
uline.com
B
G
X
W
X
W
C
B
G
X
W
X
W
C
ensuring that the holes in the middle are lined up
with the bottom of the partition. Tighten a screw (E),
a locking washer (W) and a washer (X) into each
hole using the hex key (F). Tighten firmly.
Repeat step 5 with the other base. Make sure that
the locking casters are on the same side. Tighten
firmly.
D
E x 2
F
D
E x 2
0521 IH-5860