Improper Use; Work Area - Eurosystems ABR66 Manual De Uso

We reserve the right to make design im-
provements to the machine and/or the in-
terchangeable equipment without making
changes to these instructions.
2.1 DESCRIPTION AND FIELD OF USE
The ABR66/ABR87A single blade cutter
bar is an equipment used in combination
with the MLT01 or MFL03 machine for
mowing hay grass for hobby and non-pro-
fessional use.
CAUTION!
If only the bar movement
is purchased, the owner shall lose all
warranty rights on the machine and this
equipment if it is used with bars not au-
thorised by Eurosystems (ESM codes
ESM 102 0061, 102 0071, 102 0081,
907400000, 907400500, 907400530).

2.2 IMPROPER USE

Do not use the machine to cut things oth-
er than grass.

2.3 WORK AREA

The user is responsible for the safety of
persons, property and animals within the
machine danger zone.
This zone is defined as the internal area
of a circumference of a minimum radius
of 20m with the tool mounted on the ma-
3 .1 3 .1
chine in the centre
Do not stand in the danger zone for any
reason while the machine is in operation.
Only the operator, who has read and un-
derstood the manual in all its parts, is au-
thorised to stand within this area and to
occupy the only operating position, locat-
ed behind the handlebar, holding it firmly.
The operator must check the surrounding
area before starting the machine and must pay
particular attention to children and animals.
Before starting work on a certain area,
clean it of foreign objects.
Always pay attention to the ground and the
surrounding area when working. If unde-
sired and/or dangerous objects are de-
tected, switch off the machine and secure
it before leaving the operating position to
remove them, being sure to prevent the
machine from starting, moving or tipping
over.
INFORMATION!
The procurement of such personal pro-
tective equipment is the sole responsibil-
ity of the customer or employer.
During machine use and maintenance
operations:
The operator MUST always wear suitable
safety shoes, gloves, and hearing protec-
tion devices and wear long, resistant trou-
sers and safety goggles.
1.1 1.1
(B, )
Do not wear loose-fitting clothing, jewelry,
ties, scarves, dangling drawstrings
could get caught by the equipment . Tie up
your hair.
During unpacking and assembly:
The operator MUST always wear resistant
safety shoes, gloves, and clothing.
.
3. DEFINITION OF PICTOGRAMS
DANGER – read the manual.
DANGER – moving parts.
2.4 CLOTHING
that
DANGER – cutting bar.
Keep hands away from the blades.
Cutting bar cleaning and maintenance.
DANGER!
Keep all labels clean and in good condi-
tion, replace them if damaged.
4. TECHNICAL FEATURES
GROSS weight _
NET weight 10 kg
660 mm
Blade lenght
(ABR66)
Sound power
CE declaration label
Acoustic pressure
on the last page
Vibrations
5. HANDLING AND PACKAGING
Depending on the purchased version, the
ABR66/ABR87A cutter bar can be con-
tained in the packaging of the MLT 01 ma-
chine or have its own packaging.
2 or more people are required to handle
packaging, using the handles on the card-
board box. The GROSS weight is indicated
in the "TECHNICAL FEATURES" chapter.
CAUTION!
Do not overturn or roll the packaging.
Possible damage to covers and/or me-
chanical parts.
INFORMATION!
If more than one machine or interchange-
able equipment is supplied on pallets,
unload without dropping them on the
ground. Use a forklift if necessary.
15 kg
14 kg
870 mm
(ABR87A)