Changing The Base Unit Settings - Sunbeam 112866 Manual Del Usuario

Base Unit:
1 Unplug the base unit and turn it over. Carefully insert a small screwdriver blade in the slot of the small 1/2 in. square cover over the
switches and lift the cover off the base.
2 To change the address of the base unit, carefully move one of the switches to the up position replicating the position on the remotes.
standard address
3 Snap the cover back into place, plug in the base unit and check that the base unit can receive instructions from the remote (the base
unit should beep when the on/off button is pushed or the comfort level is set on the remote).
The remote control and base unit address settings must be identical.
Note:
Repeat steps above using suggested settings for any additional remote controlled warming products.
All manuals and user guides at all-guides.com
3 alternate address options
Base unit
7