Playing A Disc - Roadstar CLR-2540UMP Manual De Instrucciones

8. To ensure good system performance; wait until the unit completely reads
the disc before proceeding.
9. If no disc loaded into the tray, or the disc is unreadable, the display will
show NO or Er.

PLAYING A DISC

1. The playback starts from track 1 automatically when reading the disc.
2. To pause playback, press PLAY/PAUSE BUTTON (15) on unit or (5) on
remote.
3. To resume playback, press PLAY/PAUSE BUTTON (15) on unit or (5) on
remote again.
4. To stop playback, press STOP BUTTON (13) on unit or (16) on remote.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press SKIP BACK/TUNING- BUTTON (12)/SKIP UP/TUNING+ BUTTON (14)
on unit or (4)/(14) on remote respectively in stop mode or during playing until
the desired track appears on the display. Press press PLAY/PAUSE BUTTON
(15) on unit or (5) on remote to start play.
To search for a particular passage during playback
Press and hold SKIP BACK/TUNING- BUTTON (12)/SKIP UP/TUNING+
BUTTON (14) on unit or (4)/(14) on remote to scan the current playing track
at high speed until desired point (passage) appears, then release the button
for normal playback mode. Playback will start again from this point.
To select a song which track number exceeds 10
To select a song/track which number exceeds 10, Press M+ BUTTON (8)/M-
BUTTON (7) on unit or 10+ BUTTON (6)/10- BUTTON (8) on remote control
each time to skip backward or forward 10 tracks, then press SKIP BACK/
TUNING- BUTTON (12)/SKIP UP/TUNING+ BUTTON (14) on unit or (4)/(14)
on remote to select desired track.
PROGRAMING TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD
20 tracks/MP3 99 tracks can be stored in the memory in any order.
1. In stop mode, press PROG BUTTON (10) on unit or MEMORY BUTTON
(15) on remote to enter program setting, the display will flash PROG and
P01.
2. Press SKIP BACK/TUNING- BUTTON (12)/SKIP UP/TUNING+ BUTTON
(14) on unit or (4)/(14) on remote to select the first desired track to be
programmed.
3. Press PROG BUTTON (10) on unit or MEMORY BUTTON (15) on remo-
All manuals and user guides at all-guides.com
English 6