Porter Cable PT10 Manual De Instrucciones página 5

• This tool is not provided with an insulated
gripping surface. Contact with a "live" wire
will also make exposed metal parts of the
tool "live" and can result in electrocution or
death.
• Fasteners coming in contact with hidden
electrical wiring could cause electrocution or
death.
HAZARD
RISK OF ENTANGLEMENT
WHAT COULD HAPPEN
• Tools which contain moving elements, or
drive other mov ing tools, such as grind ing
wheels, sock ets, sand ing discs, etc. can
be come en tan gled in hair, clothing, jewelry
and oth er loose objects, re sult ing in se vere
in ju ry.
HAZARD
RISK OF CUT OR BURNS
WHAT COULD HAPPEN
• Tools which cut, shear, drill, staple, punch,
chisel, etc. are capable of caus ing serious
in ju ry.
Square drive size
Anvil size
Air inlet
Recommended hose size
Free Speed RPM @ 90 psi
Air Consumption @ 90 psi
Maximum Torque
Clutch type
Exhaust
Weight
Accessories Required
IMPORTANT: Line pressure or hose inside diameter should be increased to compensate
for unusually long air hoses (over 25 feet). Minimum hose diameter should be
1/2" (13 mm) I.D. and fittings should have 1/2" (13 mm) NPT thread
Before each use:
• Drain water from air compressor tank and condensation from air lines. See air
compressor's operators manual.
All manuals and user guides at all-guides.com
save these instructions
SPECIFICATIONS
1" (25.5 mm)
6" (152.4 mm)
1/2" (13 mm)
1/2" (13 mm)
4000
14.7 SCFM
1430 ft­lb
rocking dog clutch
sides
30.9 lbs
ASSEMBLY
OPERATION
5 - ENG
• Avoid body contact with grounded
surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk
of electric shock if your body is grounded.
• Thoroughly investigate the workpiece for
possible hidden wiring before performing
work.
HOW TO PREVENT IT
• Never wear loose fitting clothes, or appar­
el which contains loose straps or ties, etc.
which could become entangled in moving
parts of the tool.
• Remove any jewelry, watches,
identifications, bracelets, necklaces, etc.
which might be come caught by the tool.
• Keep hands away from moving parts. Tie
up or cover long hair.
• Always wear proper fitting clothing and
other safety equipment when using this
tool.
HOW TO PREVENT IT
• Keep the working part of the tool away
from hands and body.