DWT SS09-24 Manual Original página 14

parts. This will ensure that the safety of the power tool
is maintained�
• Follow instruction for lubricating and changing ac-
cessories�
safety warnings
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock�
• Wear ear protectors. Exposure to noise can cause
hearing loss�
Safety guidelines during
power tool operation
•
When operating the power tool, you should pay at-
tention and remain vigilant� You shall not use the pow-
er tool when you feel fatigue or under the influence of
anesthesia, alcohol or drugs�
• You shall not put your fingers on switch button to
avoid starting up the power tool unconsciously when
the tool is moving�
• When mounting screws, you should ensure other
components matching the screws are fully fixed and
reliable before operating the power tool� The switch
shall be started on a safety position and the power
tool shall operate for 30 seconds, which shall be
stopped promptly in case of any serious vibration or
other problem; and arrangement shall be made for
maintenance�
• Before starting, it is necessary to determine the
location of the concealed wiring, water and gas pipe-
lines� In case of damage of electrical wiring or general
utilities (for example, by a bolt screw being screwed)
severe consequences for life and health of the operat-
ing personnel are likely to occur�
• Do not use the usual socket wrench sleeve, use the
specially designed sleeve for impact wrench� Impact
wrench sleeve is black, hard and don't damage the
screw bolt� The sleeve not for the impact wrench is
easy to be damaged, and easy to cause personal in-
jury� Before use, be sure the sleeve without cracks or
other visible damage�
• Change of the construction of socket wrenches as
well as use of detachable attachments or accessories
not suitable for this power tool is prohibited�
• Recoil (a sudden jerk of the power tool) may occur
during operation; in order to avoid dangerous situa-
tions (for example loss of balance), keep the power
tool in your hands firmly and maintain a firm posture.
• When processing small blank parts, which own
weight is not sufficient to ensure necessary fixation,
use special clamp fixtures.
Symbols used in
the manual
Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Special
Symbol
English
Autogoods "130"
13
Meaning
Serial number sticker:
SS ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Double insulation / protec-
tion class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Do not dispose of the power
tool in a domestic waste
container�