Language Selection - TallyGenicom 9050N Guia De Instalacion

Chapter 2 Setting Up Your Printer
Language
Selection
20
All manuals and user guides at all-guides.com
Following an LED self test, asterisks progress
across both lines of the display, the beeper
sounds ...
... and the Power On Self Test ends with the
top line of the display reading:
While turned on, the printer will go into the Power Saver Mode after 10 minutes of idle time.
After 4 hours of idle time, the printer will enter Sleep Mode which further reduces energy con-
sumption by turning off power to the paper handling options and the operator display. The flash-
ing green LED on the Operator Panel indicates Sleep Mode.
When you have finished using the printer for the day or you do not intend to use it for a long
period of time, it is advisable to switch off the power to conserve energy.
The default language for all LCD display messages and the Configuration
Summary and Test Page is English. You can change the language to Espanol,
Italiano, Deutsch, Brazilian Portuguese, or Francais.
The language that you select will be reflected on all LCD display messages, and also the content
of the Configuration Summary and Test Page.
To change the language used for the text on the front panel:
1 At the printer's front panel, select Printer Setup, then press the OK button.
2 Select Front Panel Setup, then press the OK button.
Quick Start Guide
*****************
*****************
Initializing
Warming up
Ready