Grounding And Ac Power Cord Connections; Features; Assembly Instructions - Schumacher Electric SI-200A Manual Para El Propietario

8.

GROUNDING AND AC POWER CORD CONNECTIONS

8.1 This battery charger is for use on either a nominal 120V, 50/60 Hz or a nominal
230V, 50/60 Hz circuit. (See the warning label on the charger for the correct
input voltage.) The plug must be plugged into an outlet that is properly installed
and grounded in accordance with all local codes and ordinances. The plug
pins must fit the receptacle (outlet). Do not use with an ungrounded system.
8.2
the outlet, have a proper grounded outlet installed by a qualified electrician. An
improper connection can result in a risk of an electric shock or electrocution.
8.3 Recommended minimum AWG size for extension cord:
• 100 feet (30.5 meters) long or less – use an 18 gauge (1.0mm
cord.
• Over 100 feet (30.5 meters) long – use a 16 gauge (1.25mm
cord.
9.

FEATURES

4
10.

ASSEMBLY INSTRUCTIONS

Remove all cord wraps and uncoil the cables prior to using the battery charger.
All manuals and user guides at all-guides.com
RISK OF ELECTRIC SHOCK OR FIRE.
Never alter the AC cord or plug provided – if it does not fit
5
1.
CHARGING Indicator
2. CHARGED Indicator
3. CHECK BATTERY Indicator
4. Battery Clips
5. Ring Terminal Connectors
6. 12 Volt Power Plug Connector
38
• •
) extension
2
) extension
2
6
1 2
3