Tabla de contenido
Publicidad
Jig saw
INTENDED USE
This tool is intended for making cut-throughs and cutouts in wood, plastic, metal, ceramic plates and rubber,
and is suitable for straight and curved cuts at 0° or 45°.
TECHNICAL SPECIFICATIONS
PRODUCT ELEMENTS
1. Switch for on/off
2. Button for switch locking
3. Wheel for adjusting sawing speed
4. Lever for selecting sawing mode
5. Laser On/Off switch
SAFETY
WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
• Always keep the cord away from moving parts of the tool
• If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the
plug
• Never use tool when cord is damaged; have it replaced by a qualified person
• Do not cut material containing asbestos
• Do not use a saw blade which is cracked, deformed or dull
• Keep hands away from the saw blade while the tool is in use
• Remove all obstacles on top of as well as underneath the cutting path before you start cutting
• Always disconnect plug from power source before making any adjustment or changing any accessory
• Wear a dust protection mask when working with materials which produce dust that is detrimental to health;
inform yourself beforehand about the materials to be worked on
• Wear protective goggles when working with materials which produce chips
• Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them
before you start cutting
• Check the functioning of the tool before each use and, in case of a defect, have it repaired immediately by a
qualified person; never open the tool yourself
• Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools
with a rating of 230V or 240V can also be connected to a 220V supply)
• When used outdoors, connect the tool via a fault current (FI) circuit breaker with a triggering current of 30 mA
maximum, and only use an extension cord which is intended for outdoor use and equipped with a splash-
proof coupling-socket
• The noise level when working can exceed 85 dB(A); wear ear protection
• When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete
standstill
• WORLDPRO can assure flawless functioning of the tool only when original accessories are used
• Use completely unrolled and safe extension cords with a capacity of 16Amps (U.K. 13 Amps)
• In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug
• This tool should not be used by people under the age of 16 years WHEN CONNECTING NEW 3-PIN PLUG
(U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the
plug
• If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left
unattended
4
Publicidad
Tabla de contenido
