Figure 2
Figure 3
Figure 4
PAGE 2 OF 6
ASSEMBLY
2. Mount large center casters to outer sides of deck with
short hex bolts, large lock washers and large washers.
Insert bolts down into deck. (See Figure 2)
3. Use large carriage bolts, large washers, large lock
washers and large nuts to finish mounting the large
center casters. Insert bolts from underneath channel,
up through the caster plate. (See Figure 3)
4. Turn the deck over onto its casters and insert the
handle into the sockets. Vertical support on handle
should face the outside of the truck. Secure the
handles into the sockets by inserting the long hex
bolts and small washers from underneath the sockets.
(See Figure 4)
1-800-295-5510
uline.com
0721 IH-6842