Daewoo International DTC-360 Guia Del Usuario página 20

Setting baby-call function
1. At on-hook state, press SET/STORE/÷ key and UP/－ key seven times, LCD displays SET 8
BABY.
2. Press SET/STORE/÷ key again, LCD displays BABY OFF or BABY ON
3. Press UP/－ or DOWN/+ key to select ON or OFF.
4. When select BABY ON, press SET/STORE/÷ key to confirm, LCD displays INPUT CODE
5. Input the baby-call number using numeric keys.
6. Press SET/STORE/÷ key to confirm.
After you set baby-call function at ON, pick up handset or press any key (except the
SET/STORE/÷ key), the baby-call number will be dialed out automatically.
Note: If the lock is at the position of forbidding all, the baby-call function is not effective.
Set extension code for transferring calls
1. At on-hook state, press SET/STORE/÷ key and UP/－ key eight times, LCD displays SET 9
ECODE
2. Press SET/STORE/÷ key again, LCD displays ECODE --.
3. The first "-" flashes to indicate to set the first digit extension code.
4. Press UP/－ or DOWN/+ key to select it from 0~9, press SET/STORE/÷ key to confirm. Set
the second digit by same way. Both digits extension code are required, otherwise it is not
available.
Note: Please refer the section "INTERCOM AND TRANSFER CALL FUNCTION" to perform
intercom calls and transfer incoming calls with the help of the extension code.
OPERATIONS DESCRIPTION
CALLER ID MESSAGE
1. When a call comes in, the telephone rings, and LCD displays the seq. number of the call, the
date, time, incoming number and NEW icon. The current date and time will be updated by the
FSK Caller ID signal while the year setting remains unchanged. DTMF Caller ID signal will not
change the date and time setting as it only contains the caller's number.
2. If the number has come twice and has not been checked, LCD displays REP icon.
3. If the caller has subscribed the private service, LCD displays ---P---; when the message is
wrong, LCD displays ---E---; when the caller has not got the Caller ID service, LCD displays
---o---
4. When incoming memory is full, the last incoming number is always replacing the oldest
number except VIP numbers.
5. If there are missed calls haven't been reviewed, the NEW LED can flicker to indicate, and will
not stop until you reviewed all missed calls.
All manuals and user guides at all-guides.com
20