Becken BECM2493 Manual De Instrucciones página 11

• Set the steel mesh into the metal funnel, making sure the tube on
the funnel aligns with the groove on the appliance, then insert the
funnel into the appliance as indicating in the "INSERT" mark, and fix
it firmly into the coffee maker by turning it anticlockwise until it is
fully locked.
• Place an espresso cup (your own cup) on the removable drip plate.
• Then connect the appliance to the power supply source. Make sure
the knob is on the "
• Press the ON/OFF switch, the power indicator (red) will be illuminated,
make sure the steam button is on the higher position which is the
" " position. Turn the knob to the "
is water flowing out, close the pump immediately by turning the knob
again to the "
water of the tank into the housing.
• When the coffee indicator is illuminated, turn the knob to the
" " position again, and there will be hot water flowing out. When
the coffee indicator turns off, close the pump by turning the knob
again to the "
MAKE ESPRESSO COFFEE
• Remove the funnel by turning it clockwise. Add ground coffee to the
steel mesh using the coffee spoon. Two spoons of ground coffee
powder can make about a cup of top-grade coffee, then press the
ground coffee powder tightly with the coffee spoon.
• Set the steel mesh into the metal funnel, make sure the tube on the
funnel aligns with the groove in the appliance, then insert the funnel
into the appliance as indicating in the "INSERT" mark, and fix it into
the coffee maker by firmly turning it anticlockwise until it is in the
"LOCK" position.
Espresso Machine | Cafetera Espresso | Máquina de Café Expresso
AF Manual Instruç o ̃ e s Má q uina de café A5 EN 3mm.indd 11
" position.
" position. The purpose of the step is to pump the
" position. The preheating is finished.
" position, and when there
EN
11
02/09/16 10:58