Philips 42FD9945 Manual Del Usuario página 4

1035.2 en 16x24 21-08-2003
Monitor Display modes
VGA 640x480
Wide VGA 848x480
Wide VGA 852x480
MAC 640x480
MAC 832x624
MAC 1024x768
MAC 1152x870
SVGA 800x600
XGA 1024x768
SXGA 1280x1024
Operation
& Insert the mains plug supplied into the
mains inlet at the back of the monitor and in
the wall socket.
For safety, please, only use the supplied rim-earthed
mains cord which has to be inserted in a grounded
socket.
é
Remote control: remove the cover of the
battery compartment.
Insert the 2 batteries supplied (Type R6/AA-
1.5V).
The batteries supplied do not contain the heavy
metals mercury and cadmium. Nevertheless in
many countries batteries may not be disposed of
with your household waste. Please check on how to
dispose of batteries according to local regulations.
"
Make sure that your electronic receiver box
and/or PC are switched on and that your PC is
in the correct display mode.
2 2
All manuals and user guides at all-guides.com
09:40 Pagina 2
60, 72, 75, 85 Hz
60 Hz
60 Hz
66.67 Hz
74.55 Hz
74.93 Hz
75 Hz
56, 60, 72, 75, 85 Hz
60, 70, 75, 85 Hz
60, 72 Hz
'
R6 / AA
When a VGA computer is connected, the
display selection is made automatically.
A message is displayed when the monitor does
not support the connected VGA mode. Switch
your computer to a correct display mode.
Switch the monitor on : Press the on/off
key B at the right side of the monitor.
A green indicator lights up and the screen
comes on.
B
When the monitor does not receive a
supported VGA signal and is not connected to
a receiver box, the screen switches to standby
and the red indicator lights up.
When you switch on your monitor for the
first time, and the monitor is not connected
to an electronic receiver box, the language
menu automatically appears on the screen.The
explanation appears in different languages one
at a time.
Follow the instructions on screen to select the
correct language or see Setup menu, Language,
p. 5.