Graco ISPB004HC Manual De Uso página 16

All manuals and user guides at all-guides.com
Vehicle belts MUST lay flat against child and MUST not be twisted.
1 1 6 6
DO NOT use shoulder belt loose or positioned under child's arm.
DO NOT position vehicle belt over top of the armrests. It must pass
1 1 7 7
underneath the armrests.
Make sure vehicle belt is NOT twisted.
Lap portion of lap/shoulder belt MUST be low and snug on hips, just
touching thighs.
1 1 8 8
DO NOT allow child to slide down in booster seat. If child will not keep
vehicle restraint properly positioned, DO NOT use this booster seat. Use
a different child restraint system.
Vehicle seat headrest must not interfere with booster seat head support.
1 1 9 9
The front of booster seat MUST NOT hang over front of vehicle seat.
The back of the booster seat MUST fit tight against the vehicle seat back
2 2 0 0
as shown.
Booster Seat Positions
2 2 1 1
Your booster seat has two positions as shown.
The back of the booster seat MUST fit tight against the vehicle seat back
2 2 2 2
as shown in either the first or second position.
2 2 3 3
DO NOT USE booster seat beyond reclined position.
Securing your Child in Vehicle
2 2 4 4
Place booster seat firmly against the back of a forward-facing vehicle
seat equipped with a lap/shoulder belt only.
Have your child sit in booster seat with their back flat against back of
booster seat.
2 2 5 5
Position shoulder belt through the shoulder belt guide shown in
NOT as shown in
2 2 6 6
tighten.
2 2 7 7
To ensure the correct head support height is obtained, the bottom of the
headrest MUST be even with the top of child's shoulders as shown
2 2 8 8
2 2 7 7
in and the shoulder belt must be positioned in the red zone as
2 2 8 8
shown in .
2 2 6 6
. Fasten buckle and pull up on the shoulder belt to
16
2 2 5 5
,