Maintenance Instructions - Makita UV3200 Manual De Instrucciones Original

• Pay attention to the cutting tools.
They do not stop immediately
after switch off.

Maintenance instructions

• Have your machine serviced by
our authorized service center,
always using only genuine
replacement parts. Incorrect
repair and poor maintenance
can shorten the life of the
machine and increase the risk
of accidents.
• Inspect the machine on regular
base.
• Before servicing, inspection,
adjustment, storage, or to
change an accessory, take
following steps:
– Shut off the power source
– Disconnect the machine
from power supply
– Make sure that all moving
parts have come to a
complete stop
– Allow the machine to cool.
• Inspect on the machine for
possible damage:
– Whether
works properly
intended function
– Whether all the moving
parts work smoothly and
adequately
– Whether all parts are not
damaged
installed
10
All manuals and user guides at all-guides.com
safety devices
for its
and properly
– Check the cutting tool for any
damage, worn or unbalance
– Check the grass catcher
regularly for any damage or
worn
– Check all the nuts, bolts and
screws are tight
– Replace or repair by our
authorized service center if
there are any damaged or
worn parts.
• Do not carry out maintenance
or repair work other than that
described in this instruction
manual. Any other work must be
carried out by Makita authorized
service center.
• Only use
replacement
accessories intended for your
machine. Otherwise it may result
in personal injury or damage on
the machine.
• Store the machine in a dry room.
Keep it out of reach of children.
Never store
outdoors.
Vibration
• People with poor circulation who are exposed to
excessive vibration may experience injury to blood
vessels or the nervous system. Vibration may cause
the following symptoms to occur in the fingers, hands
or wrists: "Falling asleep" (numbness), tingling, pain,
stabbing sensation, alteration of skin color or of the
skin. If any of these symptoms occur, see a physician.
• To reduce the risk of "white finger disease", keep your
hands warm during operation and well maintain the
equipment and accessories.
original Makita
parts and
the machine