Westward 22XP38 Instrucciones De Operación Y Manual De Piezas página 5

All manuals and user guides at all-guides.com
Westward Operating Instructions and Parts Manual
3. Grounded tools must be plugged into a properly installed and grounded outlet, which is in
accordance with all safety codes and ordinances. Never modify the plug in any manner. Do
not remove the grounding pin. Never use any adapter plugs. Check the plugs with UL
approved testers or consult with a certified electrician if you are not sure whether the
power source is properly grounded. Should the electrical tool malfunction or stop working,
grounding gives a safe way to keep the operator from electrical shock.
4. Use a straight electric plug, so that the operator can cut the power off immediately by
pulling the plug off the seat on the wall. In addition, check the shock protector to make
sure it works properly. Failure to follow instructions may result in serious injury or death.
5. Never leave the power machine in rain or in wet conditions. Wet machines often cause
electric shock.
6. Do not allow your body to contact any grounded surfaces such as radiators, ranges pipes,
and refrigerators. It is very dangerous to be electrically shocked when your body is
grounded.
7. Never abuse the electrical cord. Do not use the cord to pull the plug from an outlet and do
not use the cord to carry the machine. Keep the cord away from heat, oil, sharp edges
and/or moving parts. Replace damaged cords immediately. Damaged cords increase the risk
of electric shock.
8. Never touch plugs or tools with wet hands. Keep all electrical connectors dry and off the
ground to reduce the risk of electric shock.
9. Use machine's rate power to specify fuses on your power supply. Never use other metal
wires to replace the specified fuses. Failure to follow this rule may cause serious injury or
even death.
Personal Safety
1. Wear proper working attire, rubber‐soled non‐slip shoes, safety glasses, dust mask, hard
hat, hearing protection and leather gloves when operating the machine. Failure to follow
this rule may cause serious injury or even death.
Never grasp a rotating cable with a rag or cloth glove. Grasping the
rotational cable may cause hand or fingers to be caught on the cable and lead to personal
injury.
2. Never operate machine with belt guard removed. Keep hands away from pulley and belts.
Fingers can get caught between belt and pulley.
3. Keep hands away from the rotating drum and distributing cone. Do not reach into the drum
unless the machine is unplugged. Hand may be caught in the moving parts resulting in
serious injury.
4. Be alert at all times. Keep good judgment when operating a machine. Never operate
machine under influence of fatigue, drugs, alcohol or medications. A single second of
inattention can lead to a lifetime of regret.
5. Dress neatly. Do not wear loose clothing or jewelry. Keep hair tied and/or tucked away.
Keep long hair, clothes, and gloves away from moving parts. Such articles may result in
serious injury or death when caught in the machine.
6. Avoid accidental starting of the machine. Make sure the Rotation Switch is set at OFF
position before plugging in. Plugging in tools that have the switch on
invites accidents.
Note: This machine has a Rotation Switch and an Air‐Activated Foot
Switch. The Rotation Switch is used to set the motor and drum
rotating direction. It has three positions, representing Forward
rotation (FOR), OFF, and Reverse rotation (REV), respectively. When
ready to work, set the Rotation Switch to FOR and then press the
Foot Switch to let the machine run in the forward direction. Stop
machine first and wait for few seconds to allow the machine to stop
before changing the rotation direction.
7. Make sure adjusting keys are removed before turning the tool on. A wrench or key that is
thrown from a rotating part of the machine can result in serious personal injury or death.
8. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance
22XP38, 22XP39
Drain Cleaning Machine
5