Kärcher IVC 60/30 Tact2 Manual Del Usuario página 8

Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
– Before first start-up it is definitely necessary to read
the safety indications Nr. 5.956-249.0!
– The non-compliance of the operating and safety in-
structions may lead to damages of the appliance
and to dangers for the operator and other persons.
– In case of transport damage inform vendor immedi-
ately.
Environmental protection
Danger or hazard levels
Proper use
Device elements
Start up
Operation
Transport
Storage
Care and maintenance
Troubleshooting
Warranty
Accessories and Spare Parts
EU Declaration of Conformity
Declaration of Conformity (UK)
Technical specifications
Environmental protection
The packaging material can be recycled.
Please do not throw the packaging mate-
rial into household waste; please send it
for recycling.
Old appliances contain valuable materi-
als that can be recycled; these should be
sent for recycling. Batteries, oil, and sim-
ilar substances must not enter the envi-
ronment. Please dispose of your old ap-
pliances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
Danger or hazard levels
DANGER
Pointer to immediate danger, which leads to severe in-
juries or death.
WARNING
Pointer to a possibly dangerous situation, which can
lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation, which can
lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can
lead to property damage.
8
Contents
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
WARNING
The appliance is not suitable for vacuuming dust which
endangers health.
– This vacuum cleaner is meant for dry and wet
cleaning of floors and walls or to vacuum in produc-
tion areas.
– This appliance is suited for commercial and indus-
trial use, e.g. in storage and assembly areas and
on production machines.
– The appliance is not approved for crane loading.
Device elements
1
1 Tension lever
1
2 Filter cover
1
3 Flat fold filter
1
4 Right unlocking of the placement mechanics
1
5 Power cord
2
6 Suction head lock
2 7 Intermediate ring
8 Steering roller of the dirt container
2
9 Stopper
2
10 Dirt receptacle
3
11 Left unlocking of the placement mechanics
3
12 Impeller
3
13 Suction support
4
14 Steering roller of the chassis with parking brake
4
15 Floor nozzle holder
5 16 Chassis
17 Drain pan
18 Handle of the dirt container
19 Holder for suction pipe
20 Connection plug of the thermal probe
21 Handle of the suction head
22 "Ready for use" indicator lamp
23 Rotating knob
24 Suction head
25 Torque motor
26 Exhaust muffler
27 Push handle
28 Cable hook
29 Nameplate
30 Opening of the protective cover
31 Protective cover
32 Thermal probe
 Bring the appliance to working position - secure it,
if required, with parking brakes.
 Insert the suction hose (not included) into the suc-
tion hose connection.
 Check the fill level in the dirt container prior to start-
ing work and empty the container if necessary.
 Ensure that the dirt container has been inserted
properly.
 Attach the desired accessories (not included).
CAUTION
Check direction of rotation of the engine at every socket
change.
Note: With correct direction of rotation a strong airflow
can be felt out of the opening of the exhaust muffler. Air
is suctioned with incorrect rotation direction.
– 1
EN
Proper use
Start up
Power connection