Uline H-1387 Guia De Inicio Rapido

π
H-1387
APPLIANCE HAND TRUCK –
4-WHEEL
WARNING! Check truck and all hardware for
wear and tightness before use.
• Do not use if nylon belt is worn or cut.
• If climber belt is worn, immediately remove unit
from service and repair before use.
• Do not allow belt to twist when securing load.
1. Release the ratchet tightener and wrap the belt
around the load. Be sure to return the ratchet
tightener to the locked position once the belt is
clasped. (See Figure 1)
2. Use ratchet handle to tighten the belt and secure
the load. (See Figure 1)
Figure 1
Lock
Ratchet Tightener
in Locked Position
Belt
PAGE 1 OF 3
1-800-295-5510
uline.com
SAFETY
OPERATION
3. Press the foot release to release fold-out rear wheels
Release
4. Use the lower handle to transition the truck back to
Ratchet
Handle
• Firmly tighten belt around load before moving.
• Approach stairs or inclines with caution.
• Use only with assistance when going up or down
stairs or inclines.
• Use extreme caution when moving on uneven
floors.
from locked position. (See Figure 2)
Figure 2
the 2-wheel position. (See Figure 3)
Lower Handle
Figure 3
Para Español, vea página 2.
Pour le français, consulter la page 3.
Foot Release
0521 IH-1387