Mode Settings; Alarm Mode - Uline H-5671 Manual Del Usuario

TIME MODE
Day
AM/PM
NOTE: After entering this mode, display will
show year, month, date, hour, minute and
second. The "time" mark will appear. Daily
alarm flag will turn on if enabled.
1. Press A: No function.
2. Press B: Select 12/24 hour display format.
3. Press C: Hold for two seconds to enter the
Time/Calendar setting mode.
a. Press B to select the digits (flashing) to be
adjusted in the following order: hour, minutes,
seconds, year, month, date.
b. Press A to set the flashing digits or reset the
seconds to "00."
NOTE: The digits move quickly if A is pressed for
two or more seconds.
c. After all the adjustments are complete, press C.
4. Press D: Change to next mode.
NOTE: The year can be set from 1990 to 2029.
The date adjusts automatically for odd and
even months, including February of leap years.

ALARM MODE

NOTE: Cannot show year in this mode.
NOTE: The 12/24 hour format of alarm mode
should follow the setting format of the time
mode.
1. Press A: No function.
2. Press B: Enable/disable alarm. If enabled, a small
image will appear in the lower left corner.
PAGE 2 OF 9

MODE SETTINGS

Year
Date
Time
Alarm Time
Current Day
and Date
Current Time
3. Press C: Hold for two seconds to enter the daily
alarm setting mode.
a. Press B to select the digits (flashing) to be
adjusted in the following order: hour, minutes.
b. Press A to set the flashing digits.
c. After all adjustments are completed, press C.
4. Press D: Change to the next mode.
NOTE: When alarm goes off, it will last for 60
seconds.
PACER MODE
PACER
1. Press A: Start/stop the pacer.
2. Press B: Set the pacer value, from 05 to 240.
3. Press C: No function.
4. Press D: Change to the next mode.
TIMER MODE
The maximum setting time is 9 hours, 59 minutes and 59
seconds.
[04]
Number of
Cycles Through
Timer
0:00'10"
TIMER
1. Press A: Start or stop the timer.
2. Press B: If timer is running: No function.
If timer is stopped: 30 second countdown function.
3. Press C: If the timer is running: No function.
If timer is stopped: Hold for two seconds to reset the
countdown setting and enter Timer Setting Mode.
a. Press B to select the digits (flashing) to be
adjusted in the following order: hour, minutes,
seconds.
b. Press A to set the flashing digits.
c. After all adjustments are complete, press C.
Lower row will show
the pacer value from
05-240 counts/minute.
0:00'11"
00
Set Timer Time
68
Countdown
Timer Time
0721 IH-5671