Descargar Imprimir esta página

Fitting Instructions - Dynamics ROM Walker Instrucciones

Publicidad

Important notes
ROM Walker
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
product.
Ofa Bamberg wishes you a speedy
recovery!

Fitting instructions

The fitting instructions in pictures can be found on the fold-over
page at the beginning of the brochure.
1
To put on the Walker, open all Velcro fasteners and the textile cuff. Place
your leg in the cuff so that your heel is positioned against the back.
2
Now place the separate padding over the foot and close the Velcro
fasteners of the cuff.
3
First close the Velcro fastener over the instep by pulling the tape
through the corresponding eyelet and fastening it down. Then fasten
the Velcro tape over the toes and then the Velcro fasteners at the leg,
from bottom to top. Please ensure that the product is secure but not
too tight in order to prevent pinching.
_ rom_walker_545105060_bro_in_20180518_6651.indd 12
The Dynamics ROM Walker stabilises
your leg after injuries or operations and is
a perfect walking cast alternative. For early
mobilisation of the ankle an individually ap-
propriate range of motion (ROM) can be set
via the ROM joints. The open construction
is easy to put on and take off, making per-
sonal hygiene and wound treatment easier.
Please note
– The initial adjustment and strap-
ping on of the product must be
carried out by qualified specialist
staff.
see page 6
– If the product has to be worn in
combination with other products,
then please discuss this in ad-
vance with your doctor.
– If you experience an unpleasant
sensation, intense pain or any
other problem when wearing
the product, then contact your
doctor or specialist supplier im-
mediately.
– We use a comprehensive quality
management system to check
our products. However, should
there still be reasons for com-
plaint, please contact your spe-
cialist supplier.
18.05.2018 13:38:30

Publicidad

loading