Before Use - Rowenta IS8000 Manual De Instrucciones

All manuals and user guides at all-guides.com
Tips
Thank you for purchasing the Rowenta Commercial Garment
Steamer.
Vertical Steamers are designed to refresh garments after
hanging or folding, and to remove wrinkles from items that
are delicate or difficult to iron. Steamers are not intended to
replace an iron. To view the full range of Rowenta steam
irons, visit www.rowenta.com.
Here are some helpful tips to consider before using your
new steamer.
• Check the fabrics label for recommendations on care.
• Test fabric for color fastness on an unobtrusive part of the
garment (inner seam) before steaming.
• Do not touch silk or velvet with steam head.
• Some articles can be steamed better from the underside.
• If steaming in a low position near floor, straighten hose
up an out frequently to keep clear condensation. If hose
becomes clogged, it will make a gurgling noise.
• Heavier fabrics may require repeated steaming.
• Exercise caution at all times.

Before use

• Please read the instructions for use and
Important Safeguards carefully.
• Remove any packaging from the appliance.
• Do not plug in or turn on until assembly
is complete.
• Assemble the support rod by screwing
the individual pieces together.
• Insert support rod in the hole on top of
the main unit and screw it in a clockwise
direction by hand until it is firmly in
place.
• Attach the hanger head to the rod and
secure by pressing down until it clicks in
place. A rubber mallet may be used to
gently tap top of hanger head until it locks.
The hanger head will still rotate, for
convenience, even when in place.
Attach the hose
to the base unit
by placing the
hose connector
over the base
connector. Secure
by pressing down
until it clicks into
place.